Electrical Panel Upgrade Before a Heat Pump: What Surrey Homeowners Need to Check (2026)
A heat pump needs a dedicated electrical circuit — and some Surrey panels can carry it easily while others cannot. Here is how capacity is actually decided, why a full panel is not the same problem as an undersized service, and what happens before anyone tells you to upgrade.

Free in-home assessment · Upfront pricing · Help with rebate paperwork
Published 2026-11-19 · Airmount Mechanical
It is not '100 amps bad, 200 amps good.'
Surrey homeowners are often told a heat pump automatically means a panel upgrade, and that is not true. It is also not true that every 100-amp home can add one without a second look. The honest answer depends on a load calculation: a code-based tally of what your home already draws — heating, cooking, laundry, hot water, a secondary suite, an EV charger, a hot tub — against the capacity of your service, with the new heat pump added in. A newer home in Clayton or Grandview Heights may already have a 200-amp service and open breaker spaces, making the electrical side straightforward. An older house in Newton, Guildford or Fleetwood may have been built when a 100-amp panel carried far fewer demands, and the same heat pump lands very differently there. Neither home should be judged by the number on the main breaker alone, and no one can decide it from a photo of the panel cover. The calculation comes first.
A full panel is not the same as an undersized service.
Homeowners use 'my panel is full' and 'my panel is too small' as if they were one problem, but they have different fixes. Running out of breaker spaces is a space problem: the service may have plenty of capacity, yet there is physically nowhere to land the heat pump's new double-pole breaker. In some cases a qualified electrician can solve that with a subpanel or by reorganizing circuits. Exceeding your service capacity is the other problem: the calculated load of the whole home, heat pump included, is more than a 100-amp service is permitted to carry. Adding breaker spaces does not fix that — the service itself, the meter base and the wiring feeding the panel may need to be upgraded, commonly to 200 amps. Confusing the two leads to money spent in the wrong place, which is why the assessment has to separate them before quoting anything.

A dedicated circuit, sized to the equipment.
A heat pump does not plug into household power like an appliance. It needs its own dedicated 240-volt circuit, a breaker sized to that specific model's electrical specifications, wiring run to the outdoor unit, and an outdoor disconnect within sight of the equipment. The exact breaker size is set by the manufacturer for the unit being installed — a compact ductless system and a larger central system do not ask for the same thing, which is one more reason correct sizing matters. Our guide to heat pump sizing explains why the equipment should be matched to a proper heat-load calculation rather than a rule of thumb. One load many homeowners forget is electric backup heat: systems that use auxiliary heat strips on the coldest days can draw substantially more at exactly the moment the house needs heat most, and that draw belongs in the panel calculation from the start, not as a surprise in January.
Suites, chargers and additions compete for the same amps.
Surrey's housing stock makes this a local question, not a generic one. Many homes carry a legal secondary suite with its own cooking and laundry loads on the same service. Newer builds were wired expecting EV charging; older homes in Cloverdale and Port Kells are adding chargers, hot tubs and shop circuits to services that were never planned for them. Each addition was reasonable on its own, but the service has to carry the combined picture. That is also why a neighbour's experience proves little: the house across the street may have gas cooking, no suite and no charger, while yours runs everything electrically. When we assess a home for a heat pump — from $13,000 installed, with financing from $100 a month — we check the panel as part of the free in-home assessment, run the heat-load calculation properly, and put any electrical work that is genuinely needed into one upfront fixed price before work begins. See what the system itself involves on our heat pump installation page.
It is permitted, planned work — not a same-day scramble.
Panel and service work is regulated electrical work. It requires a permit and an inspection, it is done by a licensed electrician, and a service upgrade can involve coordinating a temporary power disconnect and reconnection. That means it should be scheduled as part of the heat pump project plan, not discovered on installation day. The good news: most of our heat pump installations are completed in a single day by our own crew once the preparation is lined up, and knowing the electrical scope early is what keeps it that way. Pricing for panel work depends on what your home actually needs — a breaker-space solution, a panel replacement, or a full service upgrade are very different jobs — so be wary of anyone quoting a firm panel price without seeing the panel, the meter base and the service route. And if your assessment shows your existing service can carry the heat pump, you should hear that plainly too, with no upgrade sold to you.
Ask these questions of any quote.
Was a load calculation actually done, and can it be shown to you? Is the problem breaker space, service capacity, or both? Does the quote include the dedicated circuit, the outdoor disconnect, the permit and the inspection, or only the panel itself? And does the heat pump price account for backup heat if your system uses it? Clear answers separate a planned project from a patchwork one. Surrey homeowners comparing heating options more broadly may also find our Surrey furnace replacement cost breakdown useful, since a dual-fuel pairing raises its own electrical questions. Airmount Mechanical is based at 2175 Lawson Ave, West Vancouver, BC, and installs and services heat pumps across the Lower Mainland — call (604) 999-4441 or email Info@airmountmechanical.com for a free in-home assessment. We'll confirm your panel's real capacity, confirm your eligibility for up to $21,500 in combined BC rebates for switching off fossil-fuel heat, and help you through the rebate process. Browse all our articles for more Lower Mainland heating guides.
Common questions
Do I always need an electrical panel upgrade for a heat pump?
No. Many homes — especially newer Surrey homes with a 200-amp service and open breaker spaces — can carry a heat pump without a service upgrade. Older 100-amp homes, homes with a secondary suite, an EV charger or electric backup heat are more likely to need work. A proper load calculation, not the age of the panel alone, decides it.
What is the difference between a full panel and an undersized service?
A full panel has run out of breaker spaces, which can sometimes be solved with a subpanel or circuit reorganization if the service capacity is adequate. An undersized service means the home's total calculated load exceeds what the service can carry — that usually requires a service upgrade, commonly to 200 amps. They are different problems with different fixes and costs.
How many amps does a heat pump need?
It depends on the specific model. A heat pump needs a dedicated 240-volt circuit with a breaker sized to the manufacturer's specifications for that unit, plus an outdoor disconnect. Systems with electric backup heat strips draw more on the coldest days, and that load must be included in the panel calculation.
Can a subpanel solve my panel problem instead of a full upgrade?
Sometimes — if your service has enough capacity but the panel has no free breaker spaces, a subpanel can be the right fix. If the service itself is overloaded, a subpanel does not add capacity and a service upgrade is the proper solution. An electrician can tell you which problem you have after a load calculation.
Who checks my panel before a heat pump installation, and what does it cost to find out?
We check your panel during the free in-home assessment, alongside the heat-load calculation for sizing the system. If electrical work is needed, it is included in one upfront fixed price before we start — heat pump installations start from $13,000 installed, with financing from $100 a month. Call (604) 999-4441 to book.
Does a panel upgrade need a permit in Surrey?
Yes. Panel and service work is regulated electrical work that requires a permit and an inspection, and a service upgrade can involve coordinating a power disconnect and reconnection. It should be planned as part of the heat pump project rather than left to installation day.
Get an exact price for your home.
Call (604) 999-4441 or book a free in-home assessment. We'll measure, calculate your heat load, and quote one fixed price — no guesswork.
Or email us at Info@airmountmechanical.com
Related reading
Heat pump installation
Cold-climate heat pumps installed in a day — from $13,000, with up to $21,500 in BC rebates.
Heat pump installation in West Vancouver →Heat pump sizing guide
Why the right-sized system matters — and why bigger is not better for comfort or bills.
Read the sizing guide →